Call Today

 

Presented here below yow will discover a lot of very good ideas about What Would Cause My Electric Water Heater to Stop Working?.

Lots of contemporary homes use an electrical hot water heater for their heating unit, due to its comfort and also simplicity of use. Nonetheless, similar to any other electrical appliances, troubles might arise with its usage, suddenly. It can be truly discouraging to wake up to a cold shower rather than a hot one or having your bathroom with water that isn't hot enough or even too warm. Whatever the instance might be, hot water heater troubles can be fairly aggravating. Luckily, we have actually made a listing of feasible options to your water heater problems. There are a number of aspects that can create a lot of these problems, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for security. Whatever the problem is, getting it repaired ought to not pose way too much of a concern if you comply with these steps:

 

Call A Specialist:

If after replacing all faulty components as well as resetting your temperature, the hot water heater still isn't working, you might need to call a professional plumber for a professional viewpoint. The trouble with your heating unit could be that the cold and hot taps have actually been switched over or it may be undersized for the quantity of warm water needed in your home. Whatever the instance might be, a professional plumber would assist resolve the issue.

 

Examine Your Power Supply:

As basic as this might appear, it is really necessary. Without ample power, your water heater will not function. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the problem, simply turn it on and off again. Change any busted or worn-out fuse. Check the home appliance with power after these changes to see if it's now working.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water appearing isn't warm enough, you might need to examine the temperature level settings on your top thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the access panel and also press the red button for temperature level reset above the thermostat. This must help heat up the water. Transform the circuit breaker back on as well as examine if the problem has actually been dealt with.

 

Inspect the Heating Element in the Water Heater:

If it's not a power trouble, after that try checking out your heating element if it is still working. Check each of your burner to make sure the trouble isn't with any one of them. If any of them is defective, replace that part and after that inspect whether the warm water is back on.

 

Verdict

Hot water heater troubles are not constantly significant. Most of them are due to small concerns like a blown fuse or damaged burner. Changing the defective components must do the trick. Nevertheless, if you are still incapable to resolve the problem, give a call to your nearest plumber to come to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a person who reads about What Would Cause My Electric Water Heater to Stop Working?, I assumed sharing that chunk was worthwhile. Sharing is good. You never know, you will be helping someone out. We cherish reading our article about No Hot Water — Water Heater Repair.

Check This Out